====== Clone a Single Hard Drive to a RAID Drive ======
  * Create your RAID array

**NOTE:** Be sure to have your RAID driver disk ready.

  * Start the Windows install
  * Press F6 to specify additional drivers
  * Insert driver disk
  * Press S to specify the drivers for your RAID controller and continue with the installation
  * After the install is complete, boot to the UBCD4Windows
  * Copy all the files from the single drive to the RAID drive -**DON'T CLONE/IMAGE THE PARTITION**
  * Reboot to the RAID drive

You should now have a perfect copy on your RAID drive with all the updates (if Windows was up to date on the single drive).



-- Main.FredPettis - 21 Apr 2009